A journal following the history, design, construction and operation of Bernard Kempinski's O Scale model railroad depicting the U. S. Military Railroad (USMRR) Aquia-Falmouth line in 1863, and other model projects.
©Bernard Kempinski All text and images, except as noted, on this blog are copyrighted by the author and may not be used without permission.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------

January 28, 2013

Another Land Merrimack

I received a note from Greg Vigle, a collector of model artillery. He sent me some photos of an model of the Land Merrimack rail gun he bought from an estate sale. Here is what he said,


By chance I happened to find photos on the military railroad page of a remarkable model that you recently constructed of the famous Petersburg railroad cannon. I was utterly astounded, especially given the timing, to find this, because I very recently acquired an almost equally remarkable model of the same piece, made over 25 years ago! I am attaching a scan of two photos of this model, taken by the maker. The scale is probably about 1/24, with the entire model about 11 inches long
              The man who made it was named Joseph Sckripkunas, he was a former machinist who specialized in making incredibly detailed models of cannons. He made over 300 over a 30 year period, and was very well known in the model cannon world. I acquired a substantial number of his remaining smaller models last year from a friend of his who was the executor of his estate, he passed away early last year. This particular model was apparently one of his most prized, with good reason.
              Like you, he had only the two known photos to go on, plus similar amounts of additional historical information (he was an expert on cannons in general). But, he most likely only had access to photos reproduced in books, as opposed to high-res 8x10 prints (I now have the latter, of both of the known photos). 
It looks like a section of G gauge track under the model, so the scale is probably close to 1/32 assuming it was built on standard gauge track.

It is different from my model in some respects, but overall, it is a very attractive model.

Thanks Greg for sending the photos and story.




January 27, 2013

Star Power



Attention, Generals Grant and Sherman will be visiting Atlanta next summer. At least, 1/43rd scale versions of them will be. I worked on these two figures over the past two days. Here is a brief description of the work.

The Grant figure is a Foundry casting. They captured his face very well, along with the cigar in his hand. The pose is a bit strange as his feet splay wide apart.  I did not have the horse that came with the figure. So I scrounged around and used a 1/35th scale Cossack pony from a Dragon set. Grant's favorite horse, Cincinnati, was  big -- 17 hands tall -- and powerful, while Grant was 5'8" and slightly built. Nonetheless, the larger scale pony was a bit too big. To make the horse appear smaller I sanded the two halves by about 2mms thinning the body. I also took about 1 mm off the withers making it shorter. I added the general officer blanket to the saddle made with sheet pewter. Some two part epoxy created a saddle for the Army commander. I  added some reins using .010 by 0.030 inch styrene strip.

General Sherman started out ironically enough as the Trident Stonewall Jackson figure. He had Shermans'  6' tall, lean look. I did several modifications to the body. First I shaved off the buttons and replaced them with dots of putty in accordance with a Union general officer. I carved off Jackson's knee high boots and filed the legs to look like long trousers. I also lengthened the figure's frock coat using putty to look more like a Union officer's. I cut away the binoculars in the figure's right hand and reshaped the hand with epoxy putty. I made a new saddle and blanket using pewter and epoxy putty. I shaved off the cast on reins and added new ones with .010 by 0.030 inch styrene strip. I also used styrene strip to add shoulder bards. Finally, I swapped heads with a spare from a Trident set of Confederates. I had to reshape the hat, but the face was very close to Sherman's.

These figures will be placed on the road show, but for now I photographed them on my layout.




January 22, 2013

Rail Guns Delivered

Dan stands by one of the exhibits.
I delivered the model rail guns to Dan Toomey at the B&O Museum.  Dan is the curator in charge of designing the War Came by Train Exhibit at the B&O Museum. The exhibit changes each year to reflect the major events of that year 150 years ago in the ACW. The rail guns will be part of the third year exhibit.

The second year the exhibit focused on the Invasion of Maryland and the battle of Antietam, especially the aftermath in treating the casualties. Note the hospital car models behind Dan.

I also had the honor of buying the first copy of Dan's new book titled, "The War Came by Train -  the Baltimore and Ohio Railroad during the Civil War." It was hot off the press and Dan was graciously enough to sign it for me. I will do a detailed review once I have had a chance to read it. But in flipping through it I was excited to see it is not a dry economic description of the railroad, but a detailed account of the people, battles, equipment and operations of the railroad. There is a remarkable picture in it that I have never seen before of several B&O engines in front of the hotel in Grafton, WV.  I look forward to reading the book.

Dan gave me a  brief tour of  the museum to see what is new. The Mason is out getting a boiler refit, so it was replaced with a restored Camel engine.  It is a beautifully ugly beast -  resplendent in its red wheels and trim. I failed to get a picture of it. Doh!

Saying good bye to Dan, I drove to M.B. Kleins hobby store, now in Cockeysville, MD. I picked up some basic supplies, though MBK doesn't have a good supply of scratch building materials.

I purchased two new colors of the Woodland Scenics fine-foliage, light green and olive green, to test against the backdrop. I can't decide which color is best.

 After dinner I proceeded to work on the Truss bridge. I realized that the trusses visible in most of the photos we have were not pin-connected like my earlier arched truss, but "standard" Howe Trusses with counter braces and cast iron pockets for the diagonal members and wrought iron rods for the tension members. Note that the diagonals are doubled in one direction and single (the counter brace) in the other.
It took several hours of drawing to redesign the parts, but once I cut them on the laser, assembly proceeded quickly (including the 828 NBWs!) I need to finish the stringers, ties, rail and upper truss and it will be ready for placement on the abutments, which also need to be made.

In placing the bridge, over Muddy Creek it looks like we need to push the left abutment back about one more inch. That is easy with the foam construction we used.

I also realized that I have half of the diagonal bridge members reversed in the model. In a Howe truss the doubled diagonals should be symmetric to the vertical center line. So three panels are one way and three the other.

I laid them all out the same.  I hope that will not be too hard to fix.




Finally, to wrap up a big day, Andy at Train Troll sent me some photos of the packet boat that will be on the left hand part of the layout. This is an HO scale model of a scow-hull towboat that he will scale up for the O Scale packet boat. It is very similar to the Clinch that we decided to use on the layout.
















January 20, 2013

First Run on the Road Show

Fueled by another of Gerry's chocolate cakes and a great dinner by Alicia,  Chief Vivandière, the USMRR work crews made a lot of progress today. Gerry arrived early and after a brief discussion proceeded to widen the gap over Muddy Creek by removing some of the embankment fill.

This made the scene work better with the planned Howe truss bridge. During the ACW railroad engineers would opt for trestle work or longer wooden bridges instead of earthen fill embankments. Moving earth was expensive in this era. Wooden structures were cheaper. The through truss represents a pre-fab bridge installed by the USMRR after the original was burned.

Bridge mock up over the widened Muddy Creek



















Gluing in the first ties
When that was complete, we proceeded to glue the ties in for the track. We started with the right hand turnout at the start of the passing siding. That is the most important siding as the mainline begins a curve as it exits that siding. Using some pre-cut turnout templates and rough ties, all cut on the laser, the tie installation went smoothly and quickly. We had all the ties except for the turntable lead installed before dinner.


View down the track




After a delicious chicken dinner we sanded the ties and Gerry stained them while I started the artwork for the laser cutting of the Howe bridge truss. With all the ties stained, we quickly spiked in some rail and ran the first train on the road show.

I was hoping to have trains running by Christmas, so we are about 25 days late. But progress is now going rapidly and we should be ready for the summer NMRA show in Atlanta. 


Using laser cut jigs to hold the rail while spiking




























The first cut of the Howe truss was helpful to check the design even though it ended up being about a half inch too squat. I need to redraw it with an additional half inch added between the chords to allow clearance for the locomotives in the through truss.




January 17, 2013

Tree Test

I experimented with some trees tonight to determine how the colors and techniques were going to work. For the basic process I used SuperTrees with a wire and wood armature to make a deciduous tree.

I had several packages of Woodland Scenics Fine-Leaf Foliage, medium green (F1131). These packages contain about 75 cubic inches of SuperTree material  that has been treated with an adhesive and coated with ground foam.  They seem to force the clumps into "tree-like" shapes because if you examine each cluster, you find the smaller branches going in random directions instead of radiating out for the main trunk. In O scale these trees will only work in the background or as bushes. Their trunks are too wispy to represent a mature tree in O Scale.

Before clipping the needles
I had a tree armature left over from a pine tree experiment (see photo at left).  I was not happy with the bumpy chenille I used as pine needles. So I clipped them off and repainted the bare trunk.

Then I took the worst-shaped clumps of fine-leaf foliage from the WS package and started gluing them to the armature with CAA and zip-kicker.

I found that I had more reticulation in the armature than I needed as the clumps of fine-leaf foliage were able to cover fairly big gaps. I used about one whole package of WS Fine-Leaf  Foliage for this tree, though I also got one good looking O Scale shrub to use along the backdrop.

Once the foliage was on, I sprayed the whole tree with matt varnish and sprinkled on some green blend ground foam to cover some bare spots.

I found that the faded green trees on the backdrop were not dark and saturated enough to blend with the WS medium green foliage, especially when the foliage is right against the backdrop.  So I got out my paints and used  Cadmium Yellow and Ultramarine Blue (green shade) with a touch of Paynes Gray to add an area of more intense colors where the trees will abut the backdrop.  I darken the shadows and added brighter highlights.  I think I got a good color match.


One O Scale tree covers a lot of ground!


Overall I think the test was a success. There will not be a lot of trees on the layout, so the ones we have must be well executed.