A journal following the history, design, construction and operation of Bernard Kempinski's O Scale model railroad depicting the U. S. Military Railroad (USMRR) Aquia-Falmouth line in 1863, and other model projects.
©Bernard Kempinski All text and images, except as noted, on this blog are copyrighted by the author and may not be used without permission.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------

April 4, 2013

The War Came by Train - 1863

The B&O Railroad Museum had a ceremony today to officially open the third year of their five-year exhibition on the Civil War called "The War Came by Train." Courtney Wilson, the Executive Director of the B&O Railroad Museum, mentioned that interest in the civil war and this exhibit has lead to a resurgence in interest in the museum. They get more than a quarter million visitors a year.

This year the museum jointly celebrated with the state of West Virginia, which is also celebrating its Sesquicentennial -  150th Anniversary of Statehood.  Several officials from West Virginia were on hand for the ceremony. Dan Toomey and Richard Wolfe gave brief speeches about the significance of the B&O in the formation of the state of West Virginia. Here were some interesting facts they mentioned.


  • The reverse side of the West Virginia state seal has an image of a B&O Railroad train.
  • The first Union soldier killed in action by a Confederate soldier happened in what is now West Virginia at a fight over a bridge on the B&O.  
  • The eastern panhandle of West Virginia, the part of the state that gives it such a distinctive shape, was a result of the Union government wanting to keep the B&O RR in the new state of West Virginia and out of the rebelling state of Virginia. Whether West Virginia could remain a state was disputed by Virginia after the war and was settled by the US Supreme Court.

The West Virginia folks brought along representatives from several gourmet shops and business in West Virginia with samples of their food and beverages.

In the gallery the rail gun models I built for the museum and the ones I loaned were on display. If you visit the museum, which I recommend, please give them a look.



The caption on the card is incorrect- this is a 1:32nd scale model on loan.





April 1, 2013

Going Postal











Last week JB volunteered to work on the post office building. On Saturday he sent me a note describing a little problem he had. In attempting to correct a warp in the plastic kit, he warmed the part in an oven set at 250 degrees. That was too warm and the plastic kit wall warped and distorted.
It was too bad, as he did a nice job on the cornice and side walls.

So that evening and the next, I had some time to make a new post office. Since this one was not starting from a kit, I was able to copy more of the features of the Cairo Post Office that is the inspiration for this model.






I laser cut the plywood core. Then I added O scale plastic brick. I used Tichy windows for the upper story, but all the others were laser cut.  The first level doors are several layers of laser cut parts.

The crown molding for the cornice was a piece of molding left over from my daughter's doll house construction. The post office sign is a custom made decal to match the prototype sign. The lettering had to be done one at a time as there was no matching  font.

To detail the interior, I added a photo of a 19th century post office on display at the post office museum. So that completes the post office except for the board walk it sits on.

With post office and depot ready to be installed (I still  need to add chimneys to the depot), I took a crack at installing a piece of backdrop. This backdrop scene is more of Brian Kammerer's artwork. The street at an angle works nicely in this spot. So far so good.



How should I treat the backdrop where the building flat touches. Should I try to
extend the brick wall, add a tree or  leave alone? Any ideaS?





March 27, 2013

So that's what barn red looks like!?

I fired up the laser tonight to cut some of the parts for the engine house. I decided to go with a single stall house. I used the engine house at City Point as a guide, but obviously with two less stalls, and only one engine deep. I laser cut the frames from my usual 1/8th inch aspen plywood. I also used some 1/4 inch stock for foundation beams, and some 1/16 basswood for the vents in the roof top monitor.  I painted the laser cut frames various shades of tan and khaki to disguise the laser burn marks.


Then I cut some sheets of scribed board and batten basswood  for the siding. They went on fairly easily. So I decided to give the siding a shot of Mt Albert Barn Red alcohol stain. I had purchased this  a few years ago and never had an opportunity to use it. I thought it could work on this building.  After brushing it on, I was not happy how it came out. First, I had some glue stains on the siding that prevented even absorption. It also accentuated the grain across several boards, and thus one could tell this was scribed siding and not individual boards. So I got out the airbrush and hit the siding with thin coats of Vallejo Hull Red, Black Grey, Black and Sand. I think I'll let it dry over night and see how it looks.


I may have to repaint it if it doesn't lighten a bit overnight as the alcohol dye evaporates. This photo by Paul Ward shows a barn with a red finish similar to the paint job I ended up getting. Looks like some gray drybrushing might help my model. But  the black air brushed stains look alike.

By the way, if you haven't try Vallejo airbrush paint, you should. It is the best air brush paint I have tried. The best feature is that it doesn't clog the air brush, plus it dries flat and covers well.



March 26, 2013

Road Show Track Plan Update

Here is an updated track plan reflecting the as-built track configuration. Some of the structres have been modified from the original plan. The QMD Clinch has been delayed indefinitely due to personal issues, so we will replace it with a barge loaded with forage and other supplies. We will leave a space for the QMD Clinch if it can be built later.

I added a small wharf at the far left. This is intended to help disguise the joint where the  river intersects the left hand backdrop. But, I am concerned that in all the photos I have seen of western rivers,  I have not seen any pictures of a wharf on the river.

If anyone has ideas on how to better treat that area, I am I open to suggestions.

I added the doors and roof to the depot. I still need to add the shingles, chimneys and the platform.






March 24, 2013

Running to the Road Show Depot

Before the run
It was a very early wake up, and a chilly morning for Steve Greene, about 700 others and I,  as we ran the Reston Half-Marathon (others did the full marathon). Steve is a KS fraternity brother from MIT.  He and I had never run a half marathon before, but we both did pretty well -  for two ancient Frat Boyz. I met my personal goal of running it under 2:00 hours, even with the hilly course (about 800 feet of vertical gain).

I was tired this afternoon from the run, so I worked on building the depot for the road show (which involved lots of sitting).  I used the depot at Cairo as inspiration.

I went with painted walls as I was getting tired of raw stained wood on most of the other structures.

I painted the laser cut interior  framing with khaki paint. Most of the interior will not be visible once the building is installed, but I will add some details that might be visible through an open door or window.  Speaking of windows, these  are Tichy parts that now come with very nice laser cut acetate glazing that fits perfectly.
The depot will be a half-flat against the backdrop. Most of the structures will be like this.


Interior structure will be largely invisible