A journal following the history, design, construction and operation of Bernard Kempinski's O Scale model railroad depicting the U. S. Military Railroad (USMRR) Aquia-Falmouth line in 1863, and other model projects.
©Bernard Kempinski All text and images, except as noted, on this blog are copyrighted by the author and may not be used without permission.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------

June 3, 2010

Working Brakes



The photos show the brake parts that are part of the new etching. The brakes work just about like the real ones, though you don't have to make the brakes operate if you don't want to. There are also other freight car detail parts on the etch. I intend to offer this etch with each freight car model I produce. I will also make the etch available separately.

These trucks are designed for Intermountain O Scale wheel sets. I will also produce a set for P48 wheel sets.

The linkage parts are etched. The links use etched clevises soldered to 0.032 inch rod. The main link is a single etching. The parts in effect create a four bar linkage, a favorite of mechanical engineers.

The hanger straps act as a spring to retract the brake beams away from the wheels. The kit will include both stainless steel or laser cut resin board for different forces of retraction. In a prototype truck, the hangers are just for safety and the weight of the beam is sufficient to retract it. This is a key departure of the model design from the prototype, but essentially transparent to the user.

When installed in a car they work as follows. The brake wheel turns and winds a small section of chain around the brake wheel shaft. The chain is secured to the upper link. (There is a clevis for that link included in the etch but is not shown in the photo.) The chain pulls the upper link toward the rear of the car. The displacement of the upper link acts on the main vertical link. It rotates about the center link while also displacing to the center of the truck, thus pulling the brake beam towards the wheels. As the vertical link pivots it pulls the lower link to the center of the car, pulling the rear brake beam into the wheels. Thus the two brake beams pull together. The strap rails retract the brakes when the chain is slackened.

The links are articulated so that as the car negotiates curves the brake linkage doesn't snag. All in all it's pretty cool. See this post for a video of the brakes in action.

The switch stands are also done and will be available for sale soon.


June 1, 2010

Painting the Flag on Memorial Day

I made a big push to finish the backdrop at Aquia Landing this Memorial Day. It was appropriate that I was painting and adding Old Glory to the ships that are docked in my version of Aquia Landing. In the Civil War the flag was a powerful emblem. Many a soldier lost his life to preserve his unit's colors, whether the National or Regimental Flag. For ships, the flag (or ensign for you squids) was an even more important device as it was the only way they could identify themselves as friend or foe at a distance. Many Confederate blockade runners and raiders escaped Union attention by flying deviously a color other than the stars and bars when leaving foreign ports.


The pink plank is a mock up of the future pier at Aquia Landing. It will be about 6.5 feet long with a car float at the left end. Since the car float is a transverse loading type, moving it during an operation session will not be simple. So the far end of the pier will act as the car float staging tracks. We won't actually drive the cars onto the ferry during an op session.


The car float on the backdrop is a piece of Brian's artwork that I modified. Most of the rest of the ships are cut-outs using Brian's art, scans of ships from books, colorized versions of photos from the actual Aquia Landing, or photos of current ships like the Pride of Baltimore and Armistad replicas. The last few I painted in place as they were quite small. I ended up with 23 ships, but need to add some barges.

The bench work is a set of Ikea Ivar shelves. I understand they no longer carry these shelves in stock. The make good workshop shelves, and pretty good model railroad bench work too.




This is the south end of Aquia Landing. The tracks will go through the wall at the far right of the photo.

Recall that landing is at the end of a swampy, low lying promontory that juts into the Potomac River. The river is about 3 miles wide at this point. Where the spit of land reaches the mainland is a sharp ridge. In my layout the viewer is standing on the north side of the spit looking to the southeast. I tried to capture this topography in the backdrop painting.

At the far south end I used Brian Kammerer's camp artwork to provide some detail. I enlarged it and placed it in front of a wooded ridge. I painted some foreground trees to hide the seams, but the overall effect is much different than in the other locations on the layout where I used Brian's art.

I also painted a small camp scene in the distance using a LoC ACW photo as guidance.

The last thing I did was give the scenery a base coat of paint. The paint is still wet in these photos. Once the paint is dry, all is ready to start laying some track!

Here are some close ups of the ships on the backdrop.
















We also had the pleasure of two visitors today, Norman and Daylene Wolf. Daylene is a first time visitor, while Norm is getting to be a regular.

May 31, 2010

Aquia Landing Backdrop

Before going with the computer printed backdrop, I thought I would take a crack at hand painting it. If this didn't work out, then I could go to the computer backdrop. Sticking with hand painting means the whole layout would have a unified look, which may be a good thing.

Here are some in progress shots.


I am pleased with how it is turning out so far. I like the ability to control the backdrop-modeled terrain junction by hand painting.

My clouds are not as good as computer printed ones, but they do add a sense of depth.







At the left is the in-progress view as you walk into the workshop where Aquia Landing is located.


I painted the far shore a bit closer than it should be on the north end, but it vanishes off in the distance as it goes south. The Potomac is 3 miles wide at Aquia Landing, so the distant shore really should only be a thin line.




The boats are cut out from computer prints, then touched up to blend into the scene by adding the rigging, smoke, reflections and other details as needed.

Controlling the perspective with cut-out boats is not as easy as when laying it out as one whole image in Photoshop. Once you make the cut-out, you can't rescale it or distort to change the prespective.

I am pleasantly surprised at how the hand painted rigging looks - better than I expected. Not having to trim all the rigging saves a lot of painstaking work.

I have been using smaller boats than I had originally designed. I may add some larger ones next.

May 28, 2010

Work Session May 27, 2010



Stormy, hot and muggy 90+ degree weather could not suppress the track gangs as we had another successful work session. Paul Dolkos, John Drye, Doug Gurin, Mark Anderson and newcomer Joel Salmons participated.

After a simple dinner of greek salad and pizza we had a brief show and tell as Joel showed us his N Scale ACW engine and freight cars. Here they are posed on a 28 ft flat car.

"So where do you want the toy train delivered, sir?"

We hooked up a power pack to a section of my former N Scale Tennessee Pass layout and test ran the engines. It ran a little bit better than my version of of the original Bachman 4-4-0, but still a bit dicey. Note Brian's Marshall House Print on the wall.

Joel wants to try making some N Scale wood beam trucks and he will enlist his son's help to do the art work. We'll try to cut them on the laser if it can be made to work.











Meantime, Paul laid track at the far end of Brook.










JD started gluing in cardboard formers to the terrain on the north side of Potomac Creek. Joel helped cut the cardboard strips.

Doug continued spiking rail at Stonemans Station.




Mark installed the fascia at Aquia Harbor.

I glued ties all through the Brook area including the tricky turn out area. With a three day weekend coming up, it's time to get some track down.

All in all a good session. Thanks guys.

May 23, 2010

Harbor Scene Backdrop Artwork

I spent a good part of the weekend working on the artwork for the Aquia Harbor Backdrop Scene. At the left is a greatly reduced version of the file. The actual file is 46,800 pixels wide by 6,300 pixels tall. At 150 pixels/inch that makes a 26 feet long image! This size really brings my iMac to its knees. Saving the file takes about 5 minutes.

The earlier version of the artwork did not have the correct overall dimensions. It also had a scene from Dyke Marsh Wildlife Preserve on the Potomac as the distant horizon. After visiting the actual Aquia Landing location I realized that the far bank of the river is quite far off and the scene I used was inappropriate. I also had subsequently taken a better sky panorama (more pixels) so I decided to redo the whole image. I also edited and revised several of the ships in the scene while I was at it.

Ken of Afforadble Signs stopped by to offer his advice. He suggested cutting the image into pieces. His sign shop could print it in one long piece, but we decided it would be easier to install if it was in three pieces. The seams will be at the corners. The print will follow three walls of the room. The left wall is 5 feet 5 inches, then a 15 feet long stretch, the another 5 feet 5 inches section.

The sky is a panoramic photo I took last winter of an interesting cloud formation, but fairly typical. The distant horizon is a separate shot of the Maryland shore from Virginia across the Potomac River photographed two winters ago. There are about 27 ships visible in the image. The boats are a combination of Brian's paintings, scanned images from books, colorized images from the actual ACW photos, and computer generated water. The file is so big that many of the Photoshop filters, such as "Distort-Ocean Ripple" will not work. That complicated construction of the image somewhat.

Next step is to print a small test section using the Ken's machine to check colors and clarity. I have been printing a few test shots on paper at home to get sizing and relative colors, but you never know what the colors will look like when we go to the actual printer.

On the benchwork front, Marco got the foam glued down and the fascia pieces cut to width in Aquia Harbor. It's almost ready to lay some track.