A journal following the history, design, construction and operation of Bernard Kempinski's O Scale model railroad depicting the U. S. Military Railroad (USMRR) Aquia-Falmouth line in 1863, and other model projects.
©Bernard Kempinski All text and images, except as noted, on this blog are copyrighted by the author and may not be used without permission.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------

June 28, 2024

The Last Piece of the Exhibit




We finished the last piece of the Omaha Beach Diorama this week. Mark Franke constructed a 1/350th scale model of the USS Frankford. That was one of the US Navy destroyers that provided direct gun fire support to the troops pinned down on Omaha Beach. By many accounts, that gunfire was crucial to helping the Allies break through the German beach defenses. 



Mark used a ship model from Dragon with a set of photo etched parts from Gold Medal Models. Mark said that he did not anticipate how difficult assembling the tiny etched parts would be. As a result it took him several months to finish the kit.






To expedite the construction process, I offered to build the diorama base and scenic treatment. That job went pretty quickly.  I used a piece of oak I had on hand to make the base. To that I added a piece of 1/8th inch hardboard that was precisely cut to hold the acrylic case. Then I added a slightly smaller piece of foam to create the water surface. 


I cut the foam on my chop saw. Then I used a small blow torch to create the wave troughs. I used the bottom of the ship model hull to create a space in the water to house the model. 




Then I used the same toilet paper mache technique as before to add texture to the waves.  Various shades of dark blue paint and several coats of acrylic gloss finished off the waves.  I set the model in the hole in the base and used heavy acrylic gloss gel to tape the waves along the hull. 



The final touch was some puffs of smoke from the 5-inch guns.






The back drop is a section from a painting from the US Navy collection painted by an eyewitness at Omaha Beach.  We installed the diorama at the Museum on Friday. 



D-Day Diorama Team Members installing the last diorama at the WW2 Experience Museum
L-R Rob Kempinski, John Drye, Bernard Kempinski, Mark Franke


May 29, 2024

LCT Hit by Mortar


Here are some photos of the completed LCT on the diorama. The scene depicts seconds after a mortar hit the ramp and blew it off.


 


Just a few items on the punch list and the diorama will be done.




 

May 28, 2024

Get to the Choppa!


The punch list on the diorama is shrinking. On Saturday, Jeff Hammer stopped by and installed most of the remaining barbed wire sections.

Meanwhile, I started scratch building the Landing Craft Tank Mk 5 (LCT) number 2227. 

I decided to use styrene parts applied to an acrylic base. I cut the acrylic base on my laser. I also used the laser to cut some of the larger styrene parts. However, the laser cannot cut small parts ins styrene, especially those with sharp angles. So, it was time to...

GET TO THE CHOPPA!

LCT almost ready for paint


It has been a while since I scratch built using styrene since most of the work on the Aquia Line I do with wood. I have an old NWSL Chopper that has seen better days. But it did a good enough job cutting the parts for this model. Styrene is easy to work using scribe and snap, model cement and putty. The chopper allows making repeat parts easy.

One of these days I need to upgrade to the Ultimation Slicer. It is a great tool. Some of my friends have the Slicer and say it very handy.

I have the Ulimation Sander and Repeater shown at the left. That is an excellent tool for working with styrene and wood. I use the Ultimation Sander to clean up cuts. The miter table is very precise. The gap between the sander and the disk is very small, making it easy to use on small parts.  You spin it by hand, so it doesn't melt plastic and it doesn't shoot dust everywhere.

I used to have a small Proxxon disk sander for modeling. It was cheaply built primarily with plastic.  It broke when it fell on my floor. The miter table it came with was toy like. It could not do small parts due to the gap in the table and the disk, and it was very loud with a shop vacuum attached. 

When using the laser to cut styrene it seems best to have the laser make slashing cuts that extend beyond the part you wish to cut. For example,  to make a right angle you would make a X-shaped cut instead of an L- shape. That seems to minimize the time the laser is in contact with the styrene at the vulnerable sharp corner, as the laser will speed by the spot where the corner will be, giving the plastic some time to cool 


thus minimizing melting. Or course, this technique doesn't work on parts with interior corners, like a window frame.  The other technique one can try on styrene is multiple light passes with a lower power setting that does't cut through fully. 

For the LCT model, I used some photo-etched stanchions and 0.015 inch phosphor bronze wire that I had on hand to make the hand rails. They are very sturdy with just CAA. I had a set of stairs and some plastic ladders in my spare box that worked.

I printed some additional parts such as the life raft, watertight doors, bollards, and vents. I added lots of punched styrene disks and other small plastic parts. 

The LCT lost its ramp during the fighting due to a mortar strike after the tanks unloaded. It became beached in the shallow water for quite a while. Its anchor also malfunctioned. While it was stranded,  it received numerous hits from small arms fire and fragments, some which created holes. But none of the crew were injured, as they stayed in the armored part of the hull until they could get moving again.



LCT 2227 loaded with trucks probably before D-Day

Nice color photo of a different LCT in Italy. It shows extensive weathering and provides some detailing ideas.

May 24, 2024

Almost Done

 

Soldiers from the 29th Infantry fight for their lives at Vierville Draw

We had an extended 2 day work session to finish up the D-Day Diorama Phase 2 - Vierville Draw.

Keith painting the cliffs
The work session started when I met Keith at the Army Navy Club to take down the Phase 1 diorama. Once that was secure in Keith's van, we headed to my house to work on the Phase 2 diorama. Keith is an amazing hard worker and we got right down to business. First Keith worked on finishing the water surface. He painted in the surf line. Then he worked on painting the rocks I carved. Meanwhile, I worked on the German bunkers and  houses in Vierville Descent (the part of town near the beach.)


After dinner, John Drye, John Kephart and Sean Barrett arrived. JD worked on the boat people, Kep painted the remaining buildings, and Sean did the tanks. There were 2 duplex drive tanks and 3 deep water fording tanks with snorkels. One of the fording tanks had a dozer blade. I worked on finishing the LCAs. Keith began applying scenery after I gave him a brief instruction on how I do it. It was amazing how the diorama transformed in that one night.

The next morning I continued with finishing the LCAs and tanks. Keith started adding the figures, obstacles and explosions. Once the boats and tanks were done, I started with scenic details such as groynes (jetties), concertina fences, and touch up painting. 

We still have some work to do, but the diorama is almost complete. 

Soldiers from D Company, 116th Infantry Regiment suffer casualties as they exit the landing craft

Overview of German Bunkers along the beach. Naval gunfire rips into the hills above while numerous American casualties lie on the beach. It is a true hellscape. 





May 18, 2024

Making Waves



We had our first group work session for D-Day Diorama Phase 2 - Vierville Draw. John Drye, Tom Karstens and Jeff Hammer joined me today for a long work session.  I have been working on this diorama for about 3 weeks, though we had house guests one of those weeks so I didn't get much done in that period. The group got a lot done today. 


JD painted the "boat people" figures. These are figures intended to be US soldiers riding in landing craft. However, many of those will be converted to casualties.  He is doing this by sanding the figures so they would lie flat on front or back. He marked the side that should face the ground with red paint - so the red is not supposed to represent blood. However, this diorama will have a lot of casualties, over 100. So there will be some blood visible.





Jeff painted infantry figures on land and obstacles. He will bring the finished figures later this week.



Tom prepped all the LCAs and tanks for paint. That involved removing marks from the 3D print supports. He them primed them. Next he airbrushed the boats after I gave him a short block of instruction on using an airbrush.  It was his first chance at using an airbrush. We said, "I'm sold on airbrushing now."  It didn't hurt that he was using a Harder Steenbeck Infinity airbrush. One of the finest on the market. 



I worked on the ocean waves and the seawall.  I had previously made the wooden base and terrain using foam in a manner similar to Phase 1. However, this terrain has more bluffs and a small village.