A journal following the history, design, construction and operation of Bernard Kempinski's O Scale model railroad depicting the U. S. Military Railroad (USMRR) Aquia-Falmouth line in 1863, and other model projects.
©Bernard Kempinski All text and images, except as noted, on this blog are copyrighted by the author and may not be used without permission.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------

February 10, 2013

Tracking down

The bridge is not yet installed, so we can remove it
to put down scenery, which will be happening soon.
Gerry came up for a Road Show work session and we got a fair amount done. He finished laying the track on the bridge section and then drove spikes elsewhere on the layout. He was curious and counted the ties on the layout and came up with 750. So that means we'll need about 3,000 spikes. I need to order more but thankfully Gerry brought a fresh supply.


Gerry brought a fresh supply spikes and more chocolate cake

Two more down, one to go.....



































In the mean time I laid in two more turnouts on the shipyard section. That leaves just one turnout and the turntable, then all the track will be done.
Pre-fabing the turnout bridles. I had pre-fabbed
 three switch stands earlier in the week.

Later in the evening we ran a test train and everything worked quite well.



February 3, 2013

Half Tracked

I installed three of the planned six turnouts on the road show layout this weekend. It takes about 3 to four hours to install each turnout including making the switch stand.  Three more turnouts and the turntable and the track will be done. There is no wiring needed as we will be running battery equipped locos, though I may add recharge feeders to the engine terminal tracks so the engines parked there can be recharged. Then it is scenery and structures.

Depot siding. The red brick building is an O Scale kit that might be a quick and easy post office. 


Andy at Train Troll sent me a note to say he was beginning work on the O Scale packet boat. This is the HO model. The O Scale model will have slight differences as it is a packet boat while the HO model is a tow boat.

February 1, 2013

Fourth Anniversary

What do these have in common:
A college degree
February 29
Olympics
Presidential term
(3.8 x10^13 Km)/c

Yes, it's hard to believe that is has been four years since I started the civil war model railroad project. I better be careful as this layout is going to take longer to build than the civil war lasted. My helpers and I have got a lot done over those years, but there still is a fair amount of work to go. All the little side projects have not helped with layout progress, but they have kept things interesting.

Last year my two main objectives were to
1. finish the layout from Brooke to Falmouth
2. build the road show in time for a debut at the NMRA National Convention in Atlanta.

The first objective is not quite completed. The layout is finished from Falmouth to Potomac Creek, with some detailing needed (is detailing ever finished?). From Potomac Creek to Brooke I have to build three more structures, lots of detailing,  some backdrop painting and then room finishing. The Aquia Landing area has all the benchwork and backdrops, but track has not started.

The second objective is well on the way. The road show should be ready by the deadline.

I will be making some changes to my priorities in 2013 as I shut down some things and start up others. But more on those later. In the meantime, work on the layout will progress with priority to the road show first, then the home layout second.

Some highlights from last year in no particular order:

  • Ballasted all the track and drove the last spike in the main room
  • Converted the first locomotive to battery power
  • Used the static grass machine for the first time
  • Had the layout featured in Model Railroad Planning 2012
  • Built three new rail gun and armored trains models for display at the B&O Museum
  • Received one blog award
  • Went on a week long Civil War History train as the on-board historian visiting Chickamauga, New Orleans and Vicksburg for the first time
  • Survived a fifth flood in the basement
  • Presented five talks on modeling the railroads of the civil war
  • Made my first spin cast items
  • Survived a Viking invasion, attack of the bald guys, and the New Joisey C&O mafia
  • Finished the design and started construction of the road show layout
  • Installed the first ever LED strip lights on a road show layout
Some blog stats 
  • 454 posts
  • 454,000 pageviews 
  • 166 followers
  • Most popular blog post - Viking Invasion
  • Highest referring site CSXdixieline.blogspot.com
  • US visitors dominate about 5 to 1 over foreign visitors.
  • Of the foreign visitors Canada leads the way, ayy!

Thanks for following along. I hope you enjoy the blog as much as I do writing it.

January 30, 2013

Baby needs new shoes

As I mentioned a few days ago, the bridge needed some type of shoe where the lower chords touch the abutments. This required that I remove some of the stone on the abutment to allow room for the new bridge shoes.

The abutments are two layers of aspen wood, so it was fairly easy to cut away one course of the stone from the first layer. I sanded the cuts smooth and then added a thin layer of Milliput to simulate the cut stone face. Once that cured overnight, I repainted the abutments and the surgery is barely noticeable.

I made bridge shoes from a piece of 0.25 by .375 inch basswood stock using prototype photos as a guide. I glued the shoes on the chords and test fit the bridge. One abutment needed a minor tweak and it was done.

As I looked at the bridge installed, I decided I did not like the contrast between the dark burned laser-cut edges versus the uncut edges of each member. So I used my airbrush to spray a thin coat of Vallejo Light Brown over the laser cut edges to lighten them. I thinned the paint about 50 percent and sprayed in light passes trying not to obscure the detail and avoid overspray on other parts. In the end, the effect worked and I think the bridge looks much better.

Now it's ready to be glued in place and track spiked up to it.



January 28, 2013

Truss Bridge Complete

I finished the truss bridge by fixing the reversed braces and adding the abutments. The braces now point in the correct direction.

The bridge was longer than we planned, so I had to do another iteration of shaving the left abutment to make room. I made the abutments with a double layer of 1/4 inch aspen wood. I laser cut the stone patterns. Then I added a layer of Milliput putty to the surface to simulate the rough stone typical of the era.

There is not a lot of clearance between the bottom of the bridge and the water, so I did not add a any type of bridge shoe.  However, there probably should be something. Adding a bridge shoe will require a slight modification to the abutment, but it is not impossible.

The bridge can currently be removed with the track since it is spiked on it. Once it is installed, we have to glue it in and attach the rail with joiners to keep it secure.

Next on the critical path is the turntable. I was planning on using my current turntable and popping in in place here. But now I think I will build a new one just for this layout.

One other task I wrapped up this evening was painting some figures. I started painting some of these Sash and Saber figures a few years ago, but never finished them. So tonight, I took two of the Trident miniatures and painted them along with finishing the other batch of Sash and Sabers. I painted these as African Americans with a Caucasian officer. These soldiers will represent part of the USCT infantry assigned to guard the depot. This was a typical mission for the newly raised USCT units at this time period. The Trident figures are very nicely sculpted. I would rank them as the best of the ACW 40mm figures I have tried.